The ridges on the coaster hide a colour layer underneath: the person sitting on side A sees one word, the person opposite sees the other. From straight above, no text is visible. In simulation it reads best at roughly 40–100 cm away.
Print at a 0.2 mm layer height. Use a dark body colour and a bright text colour; the grooves between ridges keep the cup from sticking and trap drips — wipe the water off after use.
This design has passed light and slicing simulation; real-print test results are pending.
The “Name / logo” style is a flat coaster: put text or your shop's SVG logo file on it — flush, raised or engraved. The logo file stays on your device and is sent nowhere. Limits: lines or gaps between letters narrower than the nozzle may be dropped by the slicer or print fused together — check the preview in your slicer before printing. This style has been sliced in OrcaSlicer but not print-tested.